Triumph Tiger 800 XC (2013)

Handlebars & Controls

https://xladv.com/reviews/product/5-fastway-adventure-foot-pegs/

Handlebars & Controls

https://xladv.com/reviews/product/3-rox-speed-fx-pivoting-handlebar-risers/

Handlebars & Controls

https://xladv.com/reviews/product/6-kaoko-motorcycle-cruise-control/

Luggage & Racks

https://xladv.com/reviews/product/4-wolfman-expedition-dry-duffel/

Tires Wheels Brakes

I'll update this after install and some ride time. :)

Bike Accessories

Representin'!

Bike Accessories

Two second install and makes for a strong & stable lift point when using a paddock stand. Great for tire changes and wheel & drive system maintenance. My 2013 Triumph Tiger XC already had threaded holes in the swingarm for these. I suppose that they add some swingarm protection, but I didn't buy them for that purpose.

Trailer Storage Security

I bought this for tire changes and other wheel, drive, rear braking maintenance. The stand is super easy to assemble, but the tolerances, between the square bobbin brackets shaft and the square tube that it slides within leaves a bit to be desired. They don't slide in/out without some persuasion from a hammer, but I put a thin layer of grease to help out. Now that they are set in place for the width of my swingarm, I don't have any reason to adjust them. But, if you had several bikes, I suspect that this mechanism would loosen up with a bit of use.

Lifting the bike requires not a lot of effort and once lifted, the bike is quite stable. The stand sits on a pair of R&G Racing paddock stand Bobbins:

https://xladv.com/reviews/product/229-r-and-g-racing-paddock-stand-bobbins/

For shop use, this works quite well.

Body

Details @ https://xladv.com/reviews/product/754-madstad-engineering-easy-adjust-windshield-system/

Intake

Great so far, but until I need to clean it, I'll reserve judgement. Not sure how much of a PITA it will be to pull out and re-install into the airbox breather hole.

Intake

Fits well and seems like good quality. Definitely thinner than stock, so it should flow well. Will it filter better? Not sure. But, I installed this with a UNIFilter pre-filter, so not too worried about it.

Bike Protection

Rock solid, but a little bit of a biatch to install. But, that's Triumph's fault. I think the design in terms of protection is about as good as it gets, providing great protection to the engine and radiators. They look good on the bike, really complimenting it, but blend well, not screaming "add on!".

Bike Accessories

already did a review!