Jump to content

danfarson

Members
  • Content count

    2
  • Joined

  • Last visited

Community Reputation

2 Neutral

About danfarson

  • Rank
    Newbie

Profile Information

  • Location
    Virginia
  1. danfarson

    BMW F800 GS 2010

    Lot of fun, generally reliable. Happy with stock suspension for 180lb rider, usually without much luggage. Had a case of sticky fuel injectors one time, Techron additive cured it within minutes. It's heavy when off pavement. Have dropped it dozens of times, with little damage, even though I have no crash bars installed. Handguards are THE MOST ESSENTIAL crash protection. The Hyde Racing plastic belly pan provides the most important off-pavement protection, which is to prevent rocks kicked up by the front wheel from hitting the oil filter and oil cooler. Stock radiator guard is adequate.
  2. danfarson

    BMW F800 GS 2010

    1 review

    GENERAL INFORMATION The BMW F800GS comes with a dry weight of just 392 lbs, six-speed gear box, switchable ABS, wide foot rests and a 4.2 gallon tank located under the seat for a low center of gravity, and you get a enduro light enough for amazing handling no matter where you're headed. If you want all the capabilities of the GS in a lighter, tighter, totally aggressive package, the destined-to-be-a-classic F 800 GS is your ride. ENGINE AND TRANSMISSION Displacement: 798.00 ccm (48.69 cubic inches) Engine type: Twin, four-stroke Power: 84.48 HP (61.7 kW)) @ 7500 RPM Torque: 83.00 Nm (8.5 kgf-m or 61.2 ft.lbs) @ 5750 RPM Compression: 12.0:1 Bore x stroke: 82.0 x 75.6 mm (3.2 x 3.0 inches) Valves per cylinder: 4 Fuel system: Injection. Electronic intake pipe injection / digital engine management (BMS-K) Fuel control: DOHC Cooling system: Liquid Gearbox: 6-speed Transmission type, final drive: Chain Clutch: Multiple-disc clutch in oil bath, mechanically operated Fuel consumption: 3.80 litres/100 km (26.3 km/l or 61.90 mpg) Greenhouse gases: 88.2 CO2 g/km. (CO2 - Carbon dioxide emission) Exhaust system: Closed-loop 3-way catalytic converter, emission standard EU-3 CHASSIS, SUSPENSION, BRAKES AND WHEELS Frame type: Tubular steel space frame, load-bearing engine Rake (fork angle): 26.0° Trail: 117 mm (4.6 inches) Front suspension: Upside-down front fork, Ø 45 mm Front suspension travel: 230 mm (9.1 inches) Rear suspension: Cast aluminium dual swing arm, WAD strut (travel related damping), spring pre-load hydraulically adjustable (continuously variable) at handwheel, rebound damping adjustable Rear suspension travel: 215 mm (8.5 inches) Front tyre dimensions: 90/90-V21 Rear tyre dimensions: 150/70-V17 Front brakes: Double disc Front brakes diameter: 300 mm (11.8 inches) Rear brakes: Single disc Rear brakes diameter: 265 mm (10.4 inches) PHYSICAL MEASURES AND CAPACITIES Dry weight: 185.0 kg (407.9 pounds) Weight incl. oil, gas, etc: 207.0 kg (456.4 pounds) Power/weight ratio: 0.4566 HP/kg Seat height: 880 mm (34.6 inches) If adjustable, lowest setting. Overall height: 1,350 mm (53.1 inches) Overall length: 2,320 mm (91.3 inches) Overall width: 945 mm (37.2 inches) Wheelbase: 1,578 mm (62.1 inches) Fuel capacity: 16.00 litres (4.23 gallons) Reserve fuel capacity: 4.00 litres (1.06 gallons) OTHER SPECIFICATIONS Starter: Electric Color options: White, orange/black
×