Made out of 6061-T6 aluminum, Titanium, Polycarbonate, stainless hardware and O-ringed. This offers a clean, leak proof cover that’s easy on and off, just like your stock cover. (No more than 10 Min. install time)
-This cover is minimally thicker (overall height) than your stock cover which gives you room to install a Rekluse clutch. There is .375″ of protection in critical areas to prevent crash damage.
-Also allows you to visually check for oil contamination when river crossings are often, or you have a tip over. (this is not a wet sump motor so this is not a sight glass for oil level).
-This is an easy way to make sure your clutch bolts are not loosening up, catastrophic failure occurs when that happens.
-Reuse your stock clutch cover gasket
-Cover is fully rebuild-able if need be.
-The stock cover may have a vibration dampener on the inside, this does not. Removal will not effect engine performance.
-If any cover part should fail due to workmanship or materials, I will rebuild it with pre-paid return of item after inspection to original owner.
Shop for products related to CJ Designs 1090/1190/1290 LC8 Clutch Cover