Search the Community
Showing results for tags 'CjDesigns'.
Found 1 result
1 reviewPRODUCT DESCRIPTION MADE IN THE USA Made out of 6061-T6 aluminum, Titanium, Polycarbonate, stainless hardware and O-ringed. This offers a clean, leak proof cover that’s easy on and off, just like your stock cover. (No more than 10 Min. install time) -This cover is minimally thicker (overall height) than your stock cover which gives you room to install a Rekluse clutch. There is .375″ of protection in critical areas to prevent crash damage. -Also allows you to visually check for oil contamination when river crossings are often, or you have a tip over. (this is not a wet sump motor so this is not a sight glass for oil level). -This is an easy way to make sure your clutch bolts are not loosening up, catastrophic failure occurs when that happens. -Reuse your stock clutch cover gasket -Cover is fully rebuild-able if need be. -The stock cover may have a vibration dampener on the inside, this does not. Removal will not effect engine performance. -If any cover part should fail due to workmanship or materials, I will rebuild it with pre-paid return of item after inspection to original owner.